Compressed gas fittings

Benefits Of Compressed Gas Bottle Quick Connect Fittings

The use of compressed gas fittings to connect the gas cylinder and the gas pressure regulator is an excellent way to reduce your operating costs. You can also provide improved efficiency by allowing the regulator to operate with less pressure than it would otherwise require.

The modern times are well known for their interest in reducing costs wherever possible, and this applies no less to the hydraulic industry, where compressed gas fittings and gas bottle quick connect fittings are growing in popularity. You can reduce your operating costs at your gas cylinder by fitting of a quick connection and you can also do this in the field with the provision of compressed gas fittings that you supply to your customers.

Compressed gas bottle quick connect fittings are designed to be quickly fitted and are thus quite economical to replace when they have served their purpose. A quick connection is one that allows a gas cylinder to be disconnected from the vessel that holds it. In modern times, where the storage vessel is a tank, but in older times the storage vessel was a cylindrical container containing the gas cylinder and therefore the term ‘quick connect’ comes from the fact that it is a rather simple installation.

Since there is no need to apply any pressure, such as with the pressure regulator, a compressed gas bottle quick connect fittings require a smaller gas cylinder. One benefit is that it will fit into a smaller space, with the equivalent of a ½ liter gas cylinder fitting easily fitting into a chamber the size of a standard barrel.

The most important benefits are, of course, that of cost effectiveness and improved efficiency. You will be able to sell your product for less money, and be able to utilise less of your available space.

When you want to be able to supply your customers with an increased level of service and quality, you will find that the compressed gas bottle quick connect fittings are a practical option. They will also help to ensure that you do not get shorted on gas. When you get shorted on gas, you could be subject to a risk of loss of life, that is, the loss of compressed gas due to an impending explosion or gas leak.

You will also be able to supply your customers with the ultimate in convenience and control. With a compressed gas bottle quick connect fittings you can install this within a fraction of the time it would take you to install in some cases the regulator, because you only need to supply your customers with an elongated fitting.

Because compressed gas bottle quick connect fittings allow you to install them quickly and accurately, you will be able to gain greater economies of scale. You will be able to supply your customers with the same service at a lower price than you would if you had used the regreg, which is of course the advantage of using the quick connect fittings.

The traditional regulator is also now finding its way out, as this is proving to be too complicated for the consumer, so compressed gas bottle quick connect fittings allow you to offer them a much easier alternative. They are not only cheaper but also more efficient.

The gas bottle quick connect fittings will also enable you to provide a much more comprehensive range of service, which can be beneficial to your customer. You will find that you will be able to offer your customers better service and they will be more likely to recommend your company to others.

It will allow you to develop a deeper understanding of the products that you are supplying to your customers and it will allow you to be more knowledgeable about the company’s product. You will also be able to provide your customers with more innovative solutions, and enhance your company’s reputation.

These are all benefits that you can provide to your customers and all of these can be achieved by using compressed gas bottle quick connect fittings. You should definitely consider this company to help you improve your customer base.


gas quick connectors

What Is A Gas Quick Connector?

Gas quick connectors, also known as gas hose connectors, are used to join the gas supply lines to the gas connections. This means that if you have a gas supply line at your home, you can connect it to a gas connection at your work place.

You must have a gas quick connector in order to get connected to the gas supply lines. There are two types of this: flexible and rigid connectors. Flexible connectors are used on small connections, while rigid connectors are used for big connections.

Most gas connections come in different sizes. You should get a gas quick connector that will fit all sizes of connections. Most of these connectors come with a light to enable you to get the right fit.

There are many different gas quick connectors to choose from, depending on what you need. For example, there are flexible connectors which are perfect for the smallest connections, while rigid connectors can handle the biggest connections.

For example, if you want to join two gas connections on a home, the right connector is a flexible one. These are simple to use and do not require much maintenance. If you do not want to get the gas quickly connectors, you can always use standard connections.

Flexible gas connectors are easier to maintain. However, if you want to get a good fitting gas quick connector, you need to make sure that the fitting you buy is rigid. If you do not get a rigid gas quick connector, you may get it when you try to use a flexible one.

There are many reasons why a gas quick connector should be rigid. First, a rigid gas quick connector is more resistant to bending. Second, it will make it more difficult for you to bend the connector because it will be firm.

A flexible gas connector is softer, so it can bend easily. The reason for this is that you can bend a flexible gas connector to any shape you want. Since it is very flexible, you cannot bend it, but you can also twist it easily.

A gas quick connector is also useful for attaching and disconnecting gas connections in different places. This is ideal for both gas connections at the home and at the work place. It can be used in all areas of the home or in any area where you need to disconnect gas connections.

When choosing a gas quick connector, you need to consider the size of the connections you need. There are different sizes of gas connections, depending on where they are going to be placed. Smaller connections are more suitable for smaller places, while bigger connections are most suitable for big places.

If you need to attach two gas connections at the home, you should get a larger gas quick connector. It is also used to connect a home to a gas connection at the work place. There are different styles of gas connectors to choose from, depending on the size of the connection you want to connect.

The gas quick connector is a flexible type of connector, so it will fit most types of gas connections. If you need to join two gas connections, you should get a rigid gas quick connector.


45_quick connectors.1593376473.html

What Are Quick Connectors?

Here are some quick connectors that may help with your power problems. Quick connectors may be something that you have never heard of, but it’s useful to know a little bit about them before you buy one. It’s worth looking into whether or not you have a power connector or quick connector problem.

First, let’s talk about what a quick connector is. This is a metal device that connects your electrical components together. The use of this kind of device was first used in automobiles. Today, these connectors are found in many different appliances and devices.

Basically, when you have a quick connector problem, the power that your electrical components need will never reach the appliance or device that you are trying to power up. As a result, it can be difficult to run your devices at full power. In addition, if your device doesn’t work, you may never even get it started to start in the first place.

Another aspect of a power connector is that it is very flexible. Because they are flexible, you can connect them to almost any power source. So, you can attach them to a lamp, refrigerator, stove, or whatever device you want.

Many people are under the impression that power connectors are only used for electrical connections. This isn’t true, either. Power connectors are also used for water, gas, and other kinds of fuels.

This is extremely important because you can actually damage your appliances or devices by using the wrong fuel. The water heater for example, will simply shut off if you have too much fuel. Similarly, you can damage an appliance simply by not using the correct fuel. In fact, some gasoline powered appliances can burn themselves out when you don’t change the fuel in them.

If you aren’t sure whether you have a power connector or quick connector problem, take a look at the manual that came with your device. Most appliances come with a manual, which will tell you what kind of connector you need. In addition, it will tell you what kind of quick connector you need to repair your power connector problem.

Once you have determined whether or not you have a power connector or quick connector problem, take the time to find a repair service. There are a lot of electrical service providers in your area that can fix this problem for you. Just make sure that they are certified to do this kind of work.

Lastly, if you think that you have a power connector or quick connector problem, you should consider calling a technician that can come and test your device. If you don’t call in a technician, you may find that your power connector or quick connector problem goes unsolved for days. You will save yourself from lots of frustration if you take care of this problem quickly.

If you are experiencing a power connector or quick connector problem, you can usually find a service provider online. Also, many companies offer their services for a flat rate. Usually, you can just pay online and you’ll be on your way to having the issue fixed.

Unfortunately, there are a lot of electrical appliance repair companies out there that don’t know how to fix your problem. You don’t want to have to deal with a company that doesn’t know how to fix your problem. Just make sure that you pick a company that has years of experience working with this kind of appliance.

You don’t have to spend a lot of money to fix a power connector or quick connector problem. If you have the correct tools, you can fix the problem yourself. Check out these quick connectors today.


7_quick connectors hvac.1593253958.html

What Are Quick Connectors?

Quick connectors are devices used to connect insulated metal surfaces in order to have access to electrical connections. These are also referred to as wire nuts or screw-on connectors, because the connections made by these devices are made with threaded connections and not a simple metallic joint. They can also be referred to as connector nuts for their similar design and function.

HVAC is the acronym for the Hot Water Air Conditioning system. The system is composed of two separate elements, the evaporator coil and the condenser coil. These are known as coil isolation device or air handler unit. Quick connectors can be used for the connection of both these elements in order to make them work with each other.

There are various designs of quick connectors that can be used for the purpose of connecting the components of an HVAC system. They are available in both horizontal and vertical designs. When you are choosing connectors for your home or business building, you should make sure that the connectors that you are using to meet the standards set by the local code enforcement and the industry that you are servicing.

HVAC connectors are also available in a variety of colors and materials that can help you determine the best one for your needs. These quick connectors come in copper, brass, aluminum, stainless steel, and plastics. Choosing a connector that meets the standards of your chosen industry should be top priority for any professional that you may need to hire.

HVAC connectors can also be used to mount air handlers. This is done so that the connection between the air handler and the evaporator coil is secure. The presence of this connection prevents the leaks that often occur from occurring in the process of evaporating the water.

HVAC connectors can also be used to connect two separate evaporator coils. In order to do this the connector must have an option for two pins and three pin configurations. One of the most common uses for these connectors is when it comes to connecting two items together, such as electrical plugs.

A three pin connector provides protection to the plugs from being overheated by the heating element. When these quick connectors are installed between the evaporator coil and the condenser coil, there is an option to use two pin connectors. If you are going to be installing electrical equipment in your building, you will need to ensure that these quick connectors are UL listed and marked so that they are compatible with the equipment that you plan on using.

Using connectors that are not UL listed can lead to safety issues, so it is best to take care when you are buying connectors for your HVAC system. Also remember that cables are rated according to the size of the cable itself, and these are not rated based on the type of connector that they are connected to. If you are going to be installing cables in your building, you will need to know what size connectors you are going to need in order to ensure that your cables will be able to function properly and remain properly insulated.

There are many different types of connectors that are available. They are used for different purposes and should be used according to the requirements of your system. When you are installing your system or servicing your system, you should always ensure that you know exactly what you are doing before you start.

When you are searching for quick connectors for your HVAC system, it is very important that you have a way to quickly determine if the quick connector that you are looking to meet the industry standards. You can easily check the standard lists of standards that are used in the field of electronics by visiting the website of the Institute of Electrical and Electronics Engineers. You will find a number of pages that describe what standards are used and the requirements that they have. When you are purchasing quick connectors for your HVAC system you will also want to make sure that you buy connectors that are made of quality materials and designed so that they can provide the required protection for your system. The contacts that are used for a quick connector will provide heat resistance to the wires that are attached to them. and thus will prevent the heat from increasing in the wiring over time.

When you are looking for connectors for your HVAC system you will find that you can use several different types of connectors that can be used to complete the connector requirements. and they will all provide the heat resistance that is needed to protect wires from getting overheated.


Compressed gas fittings Netherlands

Are Compressed Gas Fittings and Supplies Necessary?

Compressed gas fittings and supplies are required for every industry. Whether it is supplying propane, propylene or gasoline to an industrial company, these items must be selected very carefully. What’s more, when the end product is sold to the consumer, fittings accessories need to fit precisely and without any missing links.

There are a lot of models to choose from when looking for compressed gas fittings and supplies. These range from basic fittings accessories such as valves, valves fittings, faucet handles, spigots, faucet adapters, hose adapters, dispensers, tubes, and valves, to specific fittings for the production of certain types of products. The most common types of products that are distributed using compressed gas fittings and supplies include:

In addition to these, there are also other products that can be distributed using this type of service. These include:

Products that are used to distribute gas for domestic use also need to be produced according to the needs of the user. These may include home appliances such as water heaters, toilets, and other utilities. Most of these items will require different fittings accessories to make them properly functional.

If the item is not properly designed, it can actually shorten the overall integrity of the appliance. For instance, one valve may fit only one faucet, but when multiple faucets are fitted, it could cause damage to the faucet handle.

When these appliances are manufactured, the original valves were designed with a thermostat built into them. This thermostat was designed to prevent the faucet from being activated when the water or gas level is low. However, if the thermostat is missing or damaged, the faucet can still be activated.

After identifying the problem, it is important to seek the advice of a professional. While the problem can usually be identified by a professional, it is advisable to take some steps before calling for help. This includes putting in place measures that ensure proper functioning of the supply and fitting.

It is possible that a problem can be more serious than just having an improper fitting. In the worst case scenario, there may be a problem with the safety of the person or people who are using the appliance. For instance, if the valve were to leak, there would be a risk of the gas leaking out.

Therefore, it is very important to take advantage of compressor service. The main reason for this is that professionals will have access to the right fittings and accessories to check out the possibility of a problem occurring. This is crucial for preventing fires and explosions, as well as protecting the well-being of those who use the appliance.

Appliances and equipment such as heating and cooling systems, outdoor devices, fire pits, outdoor toilets, water heaters, and more, require special care. Even though they might be operated on gas, there is always a chance that the owner may need a provider that specializes in the manufacture of these types of products.

This is because efficiency and efficient quality are two of the most important factors when it comes to selecting suppliers for customers. Most manufactures strive to be among the top names in the industry, and some have been doing so for decades. This is why getting your hands on a good provider is vital.

A good gas supplier should be able to offer a variety of accessories to meet the needs of any business. Since the goal is to ensure the safety of the consumer, obtaining the best supplier is essential.


31_gas quick connectors.1593379642.html

Why Use Gas Quick Connectors

Gas quick connectors are commonly used in industry today, as well as in the construction industry. They are also used in residential construction sites. Installing quick connectors in a construction site, can help to reduce costs on gas supply bills, as well as preventing leaks and environmental issues.

These gas quick connectors are not really necessary for every single job you do at home. You should have one installed if you are going to use these connectors frequently, such as with propane tanks. These connectors are commonly used in construction projects such as remodeling or woodwork projects. They also are commonly used in garages and other industrial applications.

A specific valve is necessary for each type of appliance that require this connection, as well as every time the item is plugged in. This is because there are several different types of connectors available for each model of appliance, as well as for different appliances that may require different types of connections.

When installing a quick connector, you will want to know exactly what you are doing when installing the quick connector, as well as what your requirements are. For example, for every appliance, you need an outlet that is rated for it. Most of the time, the appliance itself is used to power the connectors.

Of course, there will be other outlets that you will need for your needs, so make sure you install them properly and correctly. If you are unsure of what type of connectors you require, it is best to call a company to determine which connections are needed for each appliance.

Before installing your connectors, make sure you read the manufacturer’s instructions. If you do not follow the instructions closely, you could cause some damage or embarrassment to yourself.

Make sure you understand every step of the installation process before purchasing a quick connector. You need to know exactly what all of the parts of the connector are, and you need to know how they will be connected together. You also need to know what type of connectors are needed for each appliance.

For the most part, there are manuals available that can help you with the installation process. Many manufacturers even offer installation guides online, which can be downloaded and printed out. This way you can be sure that you have everything you need to complete the job properly.

Make sure that you read the manual thoroughly before starting to install your appliances, as well as the manual you downloaded after installing the necessary connections. It is important to get the instructions right the first time. Not only is it likely that you will not be able to start a project correctly, but the manufacturers do not want you to experience any kind of issues.

There is no doubt that you will be able to complete the job properly but not starting the job the right way can cause many problems. You may be trying to connect appliances incorrectly, or you may be trying to use an improper type of appliance to complete the job. You may also be causing unnecessary damage to other parts of the construction site, or wasting gas.

When it comes to getting the installation process right, all you need to do is follow the manual. Take the time to read it thoroughly, and then make sure you follow the directions that are in the manual. Once you know the proper way to go about the installation process, you will be able to avoid problems and get your job done correctly.

Gas quick connectors can help to save you money, and they can save you gas. If you are not sure of the type of connectors you require, you may want to look into a manual. You can save yourself a lot of time, money, and headaches, if you know exactly what your options are.


46_quick connectors.1593376364.html

How to Connect Quick Connectors

Quick connectors make it possible to change out the fluid in an engine without having to dismantle the engine or remove the engines from the car. There are several different types of connectors used for this purpose. Each type is designed to meet a particular need.

Common quick connectors are designed to be removed by hand and quickly inserted. They are usually made from stainless steel that is heat-treated to make them rust-proof. These types of connectors are manufactured for some of the most common engines. Two of the common varieties are:

Most types of quick connectors are designed to fit onto the O-ring that secures the fuel line inside the engine. Once the connector is securely fitted into the O-ring, it seals again. The O-ring seal will stay intact while the liquid is being changed. When the connection is finally complete, the liquid will flow through the entire connection.

The O-ring seals will wear out over time and you must replace them. The seal is made from a rubber compound that lubricates the connections between the fuel lines and the injectors. This makes the connection stronger and less likely to leak or break. Some engines are able to use these types of quick connectors without a block or filter.

If your engine needs to be able to use these types of connectors, you will need to remove the cane filter that is inside your engine. The block and filter must be removed to accomplish this. Next, the filters and the fuel lines that are made for these types of connectors will need to be connected.

Lubricate the connections so they will flow smoothly and easily. Make sure that you do not get any dirt on the connections, as this could interfere with the seal. The next step is to disconnect the fuel lines for the quick connectors.

In most cases, you will have to remove the main lines that feed the different accessories to the engine. This includes the coolant lines, hoses that connect to the fuel lines, oil lines, water lines, and the water pump lines.

Once the hoses have been disconnected, you will need to disconnect the battery. In order to connect the various quick connectors, you will need to have access to the water pump. Remove the drain plug and fill the engine with water.

Once the engine is completely full of water, you will need to disconnect the coolant lines. Remove the hose from the air intake and reconnect the coolant hose to the water pump.

The last thing you will need to do is disconnect the manifold from the car. You will need to disconnect the main transmission mount on the firewall. Most new cars come with a gasket to make this connection and this is an important one to make because this is where the engine mounts and this connection will ensure that there is enough clearance for the transfer case.

Use your wrench to remove the bolts securing the coolant hoses to the manifold. Then, reconnect the coolant hoses to the manifold to the engine. Use the wrench to tighten the bolts.

Make sure that you are prepared before attempting to install any different quick connectors. This can help make the process easier and more efficient.


7_rapid connectors.1593384905.html

Rapid connectors are metal fasteners commonly used to join two pieces of metal. They are also referred to as brazing, though there is a difference between the two terms. One is normally a metal connection while the other is the bonding material. The use of such fasteners is useful in constructing furniture, fixing screws, fixing small holes, making metal sheets and many more applications.

Rapid connectors are important for various applications. In engineering they are very common, since they can be used in large projects. Rapid connectors are essential in order to make a simple job easier and more efficient and are very useful for any size project.

A rapid connector may be made of many different materials. The most common is metal alloys such as nickel-alloy. Depending on the material and application they can be made from an alloy that is stronger than ordinary steel or aluminum, or they can be thinner, and require less force for clamping.

Components that have these connectors are usually only made from some metal alloys. Some of the commonly used metals that are used are: Tungsten, magnesium, nickel, carbon, brass, bronze, and stainless steel. Each of these metals can make a more useful product and provide a higher quality product.

Since so many types of fasteners are used in construction, there are several types of commercial rapid connectors. They can be made of nickel, Tungsten, brass, steel, aluminum, stainless steel, plastic, or high grade steel. High grade steel is also used in the manufacturing of fiberglass and the production of parts that are less expensive and stronger.

The most popular type of rapid connector is the extruded fastener. This fastener has a bulbous head similar to a screw. The diameter of the head depends on the product to be fastened. The bulbous head provides greater grip while the protruding heads allow the connector to run over different materials.

Extruded connectors are also called glue-in connectors. Such connectors can be used to join certain items together. They are similar to regular bolts and fit snugly and smoothly. These connectors are highly preferred when it comes to attaching lightweight materials, like metal sheets.

The other type of connector is called the jig form. It is usually used in measuring purposes.

Sometimes, different materials are glued together and a fixed bond is created. This kind of bonding is called embedding and the two materials must be compatible to do this. This is also known as embedding. But there are various different approaches to embedding and some materials don’t like each other at all, but still they can be combined in order to create uniformity in the look and feel of the item.

The other types of fasteners are bow bolsters and jig attachments. Bow bolsters are bolts with a straight pointed end. They are often used to connect two pieces of metal together, while jig attachments are used to attach or glue certain metal sheets. Bow braces are also called J-bolts.

Embedded connectors are also known as hot-dip galvanized connectors. These types of connectors are able to withstand temperatures up to 1100 degrees Fahrenheit. This makes them ideal for long term applications.

Fasteners can be used for a variety of purposes. Most products can be used for more than one purpose.


quick connectors automotive

Quick Connectors For Automotive And Marine Applications

You’ve probably heard of quick connectors, but did you know that you can easily find them in different sizes for a variety of uses? The three main categories that are most used include automotive, marine and industrial.

First of all, we need to talk about automotive quick connectors and how they are used. In automotive, the automotive quick connect connector is used in a variety of applications including bolt connections, tie rods, fuel lines, hydraulic lines, oil lines, etc. These are great connectors for fastening bolts, etc.

Marine quickconnect are used in connection between the hull and an anchor. They are also used to connect different components such as lines, cable conduits, housings, valves, etc. Because of their light weight, they can easily be attached to several different parts and connectors.

Industrial quickconnector are used in various industries such as the medical industry, electronics, automotive, electronics, plastics, electronics, etc. Quickconnectors in this category are used for different applications such as connecting transmitters, computers, stereo equipment, tannoy units, antennas, radar, etc. The various uses are great, and these connectors are available in different sizes.

Let’s now take a look at automotive connectors. If you are looking for something that will help you with your needs, you should definitely consider quickconnectors in automotive.

Keep in mind that there are many different types of automotive quickconnect, so you’ll have a lot of options to choose from. Here are some of the popular types of quick connects.

Engine mount quick connects are used in many applications such as connecting the gas cap to the car. They are used because they are very durable and corrosion resistant.DIN mounting quickconnector is another popular type of quick connector. They are used for connecting antennas, transceivers, batteries, or other equipments. This connector is made with an aluminum body and an external adhesive backing.

Water tight quickconnector is another popular type of quick connector. This type of connector has the ability to seal tightly without the use of any glue. This makes it highly durable and convenient to use.

Car tray mount connectors are used to connect the trunk to the engine compartment. They are great for securing any small items, such as a GPS, iPod, or MP3 player. These connectors come in a variety of different sizes, so you should be able to find one that will work for your needs.

You should also know that quickconnectors in automotive are available in a variety of colors and sizes. You should choose one that will compliment your current paint color or vehicle interior.

Lastly, it is important to know that there are different levels of durability depending on which quickconnectors you choose. You should always make sure that you buy a connector that is going to give you years of trouble free use.


32_gas quick connectors.1593379544.html

A Look at Some Common Types of Gas Quick Connectors

Gas quick connectors are available in many varieties, including the various types of adapters. The good news is that there are a number of common adapter types that you can find on the market today. This article provides information on some of the most popular types of adapters on the market today.

The most common type of adapter you will encounter is the classic adapter. These are used with your existing gas line to connect the new unit to the gas line. This makes the most sense if you are using the gas system for domestic needs. It can also be used to connect a system with an appliance or valve to your gas line, as well.

A variation on this type of adapter is the “no-pull”solid” types. These types of adapters don’t utilize an outside faucet or nipple to make the connection. You have to change the standard faucet or the standard hoses to connect a solid-wired system to the gas line.

There are also gas quick connectors that use faucet to gas connection systems. These are sometimes referred to as power adapters and allow you to use a standard gas valve or thermostat without the use of a faucet.

The plastic adapters offer a better appearance than other types of gas quick connectors, but there are also some models on the market that have a molded finish instead of a plastic finish. It really depends on your preference.

One type of gas quick connectors that is gaining popularity in the United States is the vinyl fastener. They are made from high quality material and offer a great look to the system. If you are looking for something that will last longer and will still work well, this type of adapter is for you.

The tri-crimped plastic gas quick connectors offer a different style of adapter. This is because the gas connectors have a variety of small spaces between the lines that allow for a better flow of gas when it comes in contact with the connector. It is this feature that makes this particular adapter so popular.

The thermostatic gas quick connectors can be used with a thermostatic gas valve or other thermostatic system. These types of adapter allow for a smoother, easier flow of gas when in contact with the valves. This is one type of adapter that can be used with a thermostatic system but can also be used with many different kinds of thermostatic valves.

Some gas quick connectors use a silicone or thermo-rubber rubber coating to protect the internal workings. This is because the fitting has the ability to trap heat, which is needed to properly operate a thermostatic valve. These types of gas quick connectors are popular in Germany.

Some gas quick connectors have been manufactured to resemble small pipe bails. They are used to connect gas mains to a system that can use gas mains from a utility company or a local gas company.

There are several types of gas quick connectors that offer a wide range of compatibility. If you want to use a gas quick connector with your gas mains, you may need to do a little research on what type of connector is the best fit for your specific needs. Once you find the right match, you’ll be able to get the gas system operating without a hitch.

Gas quick connectors are designed to make connecting gas mains to your system a much easier process. Many have had great success using them in their home or business and will attest to the fact that they have been very helpful in their daily life. It is worth a little research to find the right one for your needs.